Quonset Building Restoration Underway in Hazen ND

Here's what we were working with - a Quonset building in Hazen that had seen its fair share of North Dakota weather. You can see the rust and oxidation that had built up over time, especially along the upper sections. That kind of wear doesn't fix itself, and leaving it alone just means more damage down the road.

Before any coating goes on, the surface has to be right. We power washed the whole building to strip off the dirt, loose material, and oxidation. Then came primer. That step matters more than most people realize - it's what gives the top coat something solid to bond to. Skip it, and you're just painting over a problem.

With the lower section primed and the first top coat applied, you can already see the difference. The metal is clean, uniform, and protected. The coating we use is designed to flex with the metal through freeze-thaw cycles - which is a big deal out here where temps swing hard from season to season.

North Dakota weather doesn't go easy on metal buildings. Wind, UV, temperature swings, and moisture all work against bare or failing metal. A proper restoration - power wash, prime, and quality top coat - gives the building real protection and extends its life significantly compared to leaving degraded metal exposed.

We're working through this one in stages and waiting on a good stretch of weather to wrap up the upper sections. That's just the reality of doing coating work right - you don't push it in bad conditions. The result is worth the patience.